SAFETY LABORATORY
Safety Laboratory
Safety performance testing of electronic products, covering electrical safety, mechanical safety and fire performance. Safety standards emphasize protection for users and maintenance personnel — functional failure is allowed, but danger is not.
15testing capabilities
14key equipment units
8standards / series covered
1business days to a plan
Testing Capabilities
Testing capabilities
All items below are performed within our accreditation scope; specific methods follow the corresponding standards.
Withstand voltage (electric strength)
Insulation resistance
Grounding resistance
Leakage current
Temperature rise test
Abnormal operation and fault simulation
Ball Pressure Test
Glow wire test
Needle flame test
Horizontal and vertical burning
Tracking (CTI)
Spring impact
Tumble drum drop
Enclosure protection rating
Component torque and mechanical strength
Equipment
Main equipment
The equipment list and key parameters are published here so you can judge the boundaries of our capabilities.
| Equipment | Model / Brand | Key parameters / Use |
|---|---|---|
| Withstand voltage tester | RK2671CM (Rek) | AC/DC 0-10kV, current 0~2/20/100mA |
| Insulation resistance tester | CS2676CX (Nanjing Changsheng) | 1.00~1000V，100KΩ~9999MΩ |
| Grounding resistance tester | CS2678X (Changsheng) | 0-32A |
| Leakage current tester | 421A (Ceprei) | 0.5~20mA / 100mA |
| Temperature rise recorder | 34970A (Agilent) | 0-300℃ |
| Glow wire test apparatus | OJN-9304 | Chamber 700×1100×650mm |
| Needle flame test apparatus | OJN-9303 | Chamber 700×650×1100mm |
| Horizontal and vertical burning tester | OJN-9302 | Inner chamber 0.75m³ |
| Tracking tester | OJN-9301 | 700×1100×650mm |
| Spring impact hammer | OJN-9415W | 0.14 / 0.2 / 0.35 / 0.5 / 0.7 / 1.0 J |
| Tumble drum drop tester | OJN-9509 | Inner 650×280×280mm |
| Wind shield | OJN-FZ | Inner chamber 1500×1500×2000mm |
| LCR meter | YD2817D-I (Yangzi) | L 0.0001µH~9999H / C 0.001pF~9999µF / R 0.0001Ω~9999MΩ |
| Dust test chamber | OJN-9608 | Airflow ≤2m/s, talcum powder 2kg/m³ |
Equipment is calibrated and traceable on schedule; parameters are subject to on-site calibration certificates.
Standards
Standards covered
IEC 62368-1 / GB 4943.1
IEC 60335-1 / GB 4706.1
IEC 61010-1 / GB 4793.1
IEC 60601-1 / GB 9706.1
IEC 62115 / GB 19865
IEC 60695 series
GB 7000 / IEC 60598
IEC 60529
Other Laboratories
Other laboratory capabilities
Want to see the actual condition of the equipment?
Both our Shenzhen Bao'an and Dongguan Tangxia sites accept scheduled visits, and we will arrange engineers in the relevant field to receive you.
