ENVIRONMENTAL RELIABILITY LABORATORY
Environmental Reliability Laboratory
Climate, mechanical and combined environmental testing. Accelerated methods compress problems that would only surface after years of real service into a few days of clear visibility.
22testing capabilities
12key equipment units
8standards / series covered
1business days to a plan
Testing Capabilities
Testing capabilities
All items below are performed within our accreditation scope; specific methods follow the corresponding standards.
High temperature test
Low temperature test
Constant temperature and humidity
Temperature-humidity cycling
Rapid temperature change
Thermal shock
Damp heat cyclic
Salt spray and cyclic salt spray
Gas corrosion
Ozone aging
High-pressure steam testing
Low pressure
UV aging
Xenon lamp aging
Carbon arc / metal halide lamp aging
Vibration test
Mechanical Shock
Crash test
Drop Testing
Road-simulation transport
Combined temperature-humidity-vibration
Highly accelerated life test HALT
Equipment
Main equipment
The equipment list and key parameters are published here so you can judge the boundaries of our capabilities.
| Equipment | Model / Brand | Key parameters / Use |
|---|---|---|
| Constant temperature and humidity chamber | KSON / ESPEC / TMC | 1000L，150℃~-70℃ |
| Rapid temperature change chamber | TMC | 1000L, -70~+150℃, ramp rate 10℃/min |
| Thermal shock chamber | — | Inner chamber 770×610×650mm, hot box +50~+220℃, cold box -75~+70℃ |
| Walk-in chamber | Guangzhou Dongzhixu DHW15040WBF | 2000×2400×3100mm，-40~+150℃ |
| Salt spray chamber | TMC | 880×590×500mm，+5~55℃ |
| Cyclic salt spray chamber | UK ASCOTT C1000 | 1200×1000×500mm |
| Q-SUN xenon test machine | Q-Lab XE-3-HS | Full spectrum 300~800nm, black panel temperature 50~120℃ |
| UV weathering chamber | TMC | 48 sample panels, irradiance 0.25~1.55W/m²/nm |
| Electrodynamic vibration table | Sushi DC-1000 | Thrust 5.88kN, acceleration 100G, 1-5000Hz |
| Mechanical shock test table | Jindun DP-1200-60 | Primary table 350gn / secondary table 3000gn |
| Carton compression tester | TMC | Max force 5000kg, stroke 1500mm |
| Drop tester | TMC | Effective travel 1.2m |
Equipment is calibrated and traceable on schedule; parameters are subject to on-site calibration certificates.
Standards
Standards covered
IEC 60068-2-1 / -2 / -14 / -30 / -38 / -78
GB/T 2423 Series
QC/T 639 / QC/T 15
GB/T 10125 / ISO 9227
GB/T 20854 / ASTM G85
ISO 4892 / ASTM G155
GB/T 4857 series / ISTA series
ISO 16750-3 / -4
Other Laboratories
Other laboratory capabilities
Want to see the actual condition of the equipment?
Both our Shenzhen Bao'an and Dongguan Tangxia sites accept scheduled visits, and we will arrange engineers in the relevant field to receive you.
