Factories making bottle warmers and sterilizers know this scene. The whole unit passes safety testing, the shell and buttons have cleared chemical tests under toy-safety requirements, the paperwork looks complete – and the shipment stalls at the buyer’s QA desk. They point to the nipple, the inner liner and the outlet: parts that touch milk or go into the mouth. Those, they say, need migration testing as food-contact materials. The factory is puzzled. If it is all chemical testing, why test again?
1. The pain: one appliance, two regimes for its parts
A baby appliance is not subject to a single set of chemical rules. Split it by what each part does. Structural parts – the housing, buttons and trims – follow toy-safety or electrical-and-electronic restricted-substance requirements. Parts that touch milk or the mouth – the nipple, bottle liner, silicone seal, outlet and the contact surface of the sterilizing tray – fall under food-contact materials. The two regimes ask different questions. Toy safety and restricted-substance rules govern how much of a forbidden substance a material contains. Food-contact rules govern whether substances migrate from the part into food during contact with milk, steam or grease, usually assessed through overall and specific migration. Passing the whole-unit chemical test therefore says nothing about these mouth-contact parts.
2. The key judgement: split the BOM by contact
Start by sorting the bill of materials by contact scenario. Non-contact structural parts follow restricted-substance and toy-safety requirements. Milk-contact or mouth-contact parts follow a food-contact regime – commonly referenced frameworks include EU Regulation EC 1935/2004 with its plastics measure EC 10/2011, German LFGB, the relevant US FDA regulations and China’s GB 4806 series. Which regime applies depends on the market. The specific migration tests, food simulants and limits follow current regulations and the agreed technical specification.
| Part category | Typical parts | Governing regime | Focus |
|---|---|---|---|
| Structural / non-contact | Housing, base, button film, cable jacket | Restricted substances / toy safety | Substance content |
| Milk-contact / mouth-contact | Nipple, liner, seal, outlet, tray contact surface | Food-contact materials | Overall and specific migration |
3. Common pitfalls
- Assuming ‘the whole unit passed toy chemical testing’ covers every part, when mouth-contact components belong to a separate regime;
- Testing the nipple from the sample batch, then switching to another supplier’s silicone in production without a material review;
- Choosing food simulants, temperatures and contact times that do not match real use – a warmer is a heated scenario, so conditions must reflect that;
- Mixing up markets and submitting to the wrong regime, so the report does not match what the buyer requires;
- Leaning on a supplier’s verbal ‘food grade’ claim for a silicone part, with no test report to back it up.
4. Conclusion
Chemical compliance for baby appliances runs on two tracks defined by part function: restricted-substance content for structural parts, and food-contact migration for mouth-contact parts. Before testing, sort the bill of materials by contact scenario, confirm which regime the target market accepts, and have the lab build a separate test plan for each group. If the scope is unclear, hand the part list and intended use to the lab for a technical review – far less painful than having a report rejected and having to test again.
文中涉及的测试项目均可委托 TMC LAB 执行。把产品和目标市场发给我们,可得到针对性的测试清单。
Industry Compliance
Industry Compliance


读者评论 0
还没有评论,来说两句吧。