TMC LAB CNAS L8364 CMA 202119015835 Report Verification
TMC Forum
Standards Interpretation

My interior passed odor and VOC tests — so why do the windows still fog up in summer heat and fail the fogging spec?

Odor, VOC and fogging are three different metrics: a cabin can smell fine and stay within VOC limits yet still fail when volatiles condense into a haze on a cold windscreen.

7 分钟读完 Standards Interpretation
1 浏览

Why a passing odor result still fails the fogging check

Interior-component engineers keep running into the same puzzle. The instrument panel and door trim pass their odor grading (commonly a 1 to 6 scale such as VDA 270), and the VOC figures sit inside the specification. Then, after the finished vehicle bakes in a sealed lot on a summer afternoon, a thin hazy film appears on the windscreen and side glass — wipe it away and it returns. The OEM rejects the batch for fogging, and the team is left asking what went wrong. In most cases the testing was done; the mistake was treating odor, VOC and fogging as one and the same thing.

The key check: three distinct metrics

  • Smell versus deposit. Odor relies on a panel rating how strong a smell is. Fogging measures the volatile matter that condenses onto a cold glass or optical surface and leaves a mist-like deposit — it asks whether a residue is visible and how much light it scatters. A low-odor material is not automatically a low-fogging one; some mildly smelling compounds produce surprisingly heavy condensates.
  • Passing VOC does not mean passing fogging. VOC looks at total or specified volatile compounds, while fogging targets only the fraction that re-condenses into a film on a cool surface. The two use different sampling, heating conditions and endpoints, so a VOC report cannot substitute for a fogging verdict.
  • Match the method and the real condition. Fogging is commonly assessed gravimetrically or by gloss loss, and thermal-desorption methods can report VOC and condensate (FOG) together. Heating temperature, dwell time, cold-surface temperature and sample state all shift the result, so align the protocol with the target OEM’s specification.

Common mistakes

What teams do The risk
Run odor and VOC only, skipping fogging Haze is discovered only after heat soaking, forcing a rejected batch and rework
Assume a low-odor material automatically passes fogging Odor and fogging are unrelated; each material must be verified separately
Use different heating and cold-surface conditions between batches Inconsistent data breaks comparison and traceability
Trust incoming material data but ignore assembly Adhesives, protective films and release agents introduce new volatile sources

Conclusion

Odor, VOC and fogging are three separate matters and should each be covered against the target OEM’s specification — one report rarely covers all three. For large heated parts such as instrument panels, headliners and door trims, run a fogging screening before the design is locked so high-risk materials can be screened out early. Acceptance limits follow the OEM’s technical agreement, since methods and ratings differ widely between automakers; aligning the protocol up front is far less costly than reworking a vehicle after a heat soak.

TMC Maike Testing | CNAS Accredited Laboratory (L8364) | CMA Accreditation
Shenzhen Bao’an + Dongguan dual bases · 10000 sqm laboratory | Serving 100+ countries worldwide
13510907826 | cert@tmc-lab.com

文中涉及的测试项目均可委托 TMC LAB 执行。把产品和目标市场发给我们,可得到针对性的测试清单。

返回内容中心

标准看得懂,项目才做得对

把标准号和产品发给我们,技术顾问用工程语言讲清楚要做哪几项、为什么。

Discussion

读者评论 0

还没有评论,来说两句吧。

发表评论

Call